-40%
USB Recording Module (Multi Sound Files per Button) with Buttons, Speaker and Ba
USB Recording Module (Multi Sound Files per Button) with Buttons, Speaker and Ba
USB Recording Module (Multi Sound Files per Button) with Buttons, Speaker and Ba

USB Recording Module (Multi Sound Files per Button) with Buttons, Speaker and Ba

$ 15.82

  • Brand: Unbranded
  • MPN: FN-T418-Kit
  • UPC: 744790346282
  • gtin13: 744790346282

Description

This kit includes: The MP3 player board with build in 3 Watt amplifier 4 push buttons with 12" leads a 3-watt speaker with 6 inches of wire connected. 3 x AA battery holder with 5.9" leads All that is needed is a small screwdriver to attach the wires to the MP3 board. Add 3 x AA batteries and you are good to go! Features of The FN-T418 Uses a micro USB port to directly plug into the USB port of PC for easy use of the sound module. Built-in an 8MB flash memory, which is able to store a total of about 8 minutes long MP3 files of Supports earlier Windows, Windows 10, and Mac operating systems Support audio format: MP3 and WAV Able to play multiple audio files on per button. Built-in a class D 3Watts amplifier IC and a 3.5mm audio Directly drives a 0.5Watts to 3Watts (4ohms to 8ohms) speaker Volume is adjustable through adjusting the blue potentiometer Built-in headphone output for easy use if the external speaker is not something that will work with your project. 4-Key Operations with 7 Triggering Modes 0: Short press the button to start playing, and during playing, if you press the button again, the playback will be interruptible and it will play from the beginning. 1: Press the button and hold to start playing repeatedly, and when the button is released the board stops playing. 2: Short press the button to start playing, and during playing, if you press the button again, the playback will be NOT interruptible. 3: Short press the button to start playing repeatedly and press the button again to stop. 4: Press the button and hold to start playing once, and when the sound file goes to the end, the board stops playing. 5: Interruptible and switches to the next sound file. 6: Uninterruptible Working voltage: 3.7-5V DC Working current: ≤100mA (1Watt 8ohms speaker) Standby current: 0μA Suitable to be powered with 3 x AA, 3 x AAA batteries or a Li-ion battery PCB size: 50mm x 34mm Height of the module: 14mm Features of the Battery Holder With leads (150mm) For: 3 x AA (LR06) Features of the Button With 12" (30mm) leads Ends stripped and tinned 0.12" (3mm) Specifications: Momentary Push Switch Flat rubber head (white) 3mm height Features of the speaker Small Size Power rating: 3W Impedance: 8Ω 57mm diameter and 12mm high 6 inches of wire pre-attached